Products
Nelissen – Products – Seifert products
Nelissen – Products – Seifert products
Seifert is a Belgian company founded in 1912. The company specializes in the production of drywalls. Offering over 1,000 colors makes Seifert an absolute leader in tinted joint compounds. It is possible to order a joint compound of any color.
Nelissen has been collaborating with Seifert for over 15 years. A high-quality, color-intensive joint is needed to make the Nelissen bricks distinct and stand out. About 30 different and most commonly used joints are always in the inventory. Continuous inventory gives customers the opportunity to start quickly with jointing without spending too much time on ordering and the delivery of compounds.
INTRODUCTION – Seifert’s compounds are produced in Belgium using fine (cleaned) raw materials, drying in special kilns and paying attention to the precise compound formula.
The compound consists of: whitened and rolled quartz grains, natural stones, selected crushed lime min. 95% calcium hydrate, white cement, moisture resistant products, mineral colorants.
FEATURES – Even quality and color – The compound is mechanically dry mixed and therefore it is absolutely homogeneous (even), which in turn ensures even quality and color to all products.
Waterproof – The joint compound is made waterproof already in the bulk and as a result, there will not be even a slightest crack. The compound is suitable for all bricks.
Good adhesion
Maintenance free – The joint compound is water repellent, which means that after hardening, the compound takes in an extremely low amount of water and therefore is totally moss proof. There is no need for maintenance (one of the main reasons why we use clay bricks and high-quality compounds).
USE – The joint compound is mixed with clean water (3-3.75 l/25 kg) until it reaches to a similar humidity as the soil (mix 3-4x). It is advisable to thoroughly brush the joint gaps and properly moisturize the wall (using clean water) before jointing. The joint compound is also suitable for masonry.
COLORS – More than 60 different standard colors are available. In addition, it is possible to make all kinds of different colors, if desired. Seifer joint compounds deliver an even tinted joint on the entire surface of the facade. There are ready-made and powder sample colors available.
CONSUMPTION- The consumption of a compound obviously depends on the joints’ width and depth and the bricks’ format. The standard consumption of jointing a regular-sized facing brick is generally about 8 kg/m², considering it is 10-11 mm wide and 12 mm deep. For the masonry work, the consumption of the compound is about 35 kg/m².
PACKAGE – The jointing compound is packed in 25 kg moisture-proof paper bags. The bags show the name of the company and the origin of the product. There is 1250 kg (50 bags) on the pallet and orders can be made from 25 kg (1 bag).
STORAGE/PRESERVING- Store in a dry place protected from rain and wind, for example on wooden shelves, in which case the compound preserves its quality for at least 1 year.
Standard compounds (inventory products):
905 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Special compounds:
9732 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|