Available sizes
| Clay bricks | 210x65x100 mm | 58 tk/m² |
|---|---|---|
| Brick slips | 210x65x20 mm | 58 tk/m² |
| Brick slip corners | 210x65x20x100 mm |
Physical properties
| Euro CE (EN 771-1) |
|---|
| Belgium BENOR (PTV 23-002) |
Dimensions and durability
| Resilience category | Class T2 |
|---|---|
| Scope category | Class R1 |
Description
Rich colourful splendour. The Hades hand-moulded facing brick is part of the Hammered range of Nelissen Brickworks. The facing brick (non-perforated) is sanded on five sides and may be provided with an elongated oblique notch on one flat side. The structure has a rugged appearance with irregular ribs in the sanding. The baking process is carried out in a gas-fired tunnel furnace under slightly reduced pressure. The rugged retro look of this brick is obtained by using a special ageing process. The base of the brick is red. The colour shades vary from red-beige and grey-white to black with reduced spots, with white deposits visible. The ageing process also influences the colour shades.
Pressure
Technical specifications
| Pressure | 25 N/mm² |
|---|---|
| Reaction to fire | Euro class A1 |
| Water absorption | < 13%% |
| Water evaporation rate | 5/10 (table value EN 1745)s |
| Freezing / Thawing Resistor |
F2, cold class D, respectively, BRL 1007 Highly frost resistant according to PTV 23-002 |
| Characteristic compression strength | 30 N/mm² according to PTV 23-002 |