Available sizes
| Clay bricks | 210x65x100 mm | 58 tk/m² |
|---|---|---|
| Brick slips | 210x65x20 mm | 58 tk/m² |
| Brick slip corners | 210x65x20x100 mm |
Physical properties
| Euro CE (EN 771-1) |
|---|
| Belgium BENOR (PTV 23-002) |
Dimensions and durability
| Resilience category | Class T2 |
|---|---|
| Scope category | Class R1 |
Description
Southern glow The Ceto hand-moulded facing brick is part of the Hammered range of Nelissen Brickworks. The facing brick (non-perforated) is sanded on five sides and may be provided with an elongated oblique notch on one flat side. The structure has a rugged appearance with irregular ribs in the sanding. The baking process is carried out in a gas-fired tunnel furnace under slightly reduced pressure. The rugged retro look of this brick is obtained by using a special ageing process. The base of the brick is yellow. The different colours of the substrate and the sand types used provide colours ranging from yellow to light pink with beige and grey shades, with white deposits visible. The ageing process also influences the colour shades.
Color
Technical specifications
| Pressure | 25 N/mm² |
|---|---|
| Clamping force |
NPD N/mm² if jointed NPD N/mm² thin layer cooled |
| Reaction to fire | Euro class A1 |
| Water absorption | < 17%% |
| Water evaporation rate | 5/10 (table value EN 1745)s |
| Total density | 1500 kg/m³, D2 |
| Purity | NPD kg/m³, D2 |
| Freezing / Thawing Resistor |
F2, cold class D, respectively, BRL 1007 Highly frost resistant according to PTV 23-002 |
| Characteristic compression strength | 30 N/mm² according to PTV 23-002 |